PU-Foam Aerosol Filling Machine

Product Descripition: Polyuretheane foam filling machine(QGB-900E aerosol filling ),combined Polymeric MDI filling machine, semi-automatic sealing machine, dimethyl ether filling machine, and LPG filling machine(with two booster pump station) on a single platform, can work with the single machine, and also can be regulated to realize two-machine, three-machine, or four- machine linkage work.Semi-automatic sealing machine is of reliable quality, easy to install and adjust,and its large cylinder can complete seallling as usual under at Air pressure of 0.25-0.3MPa.It is mainly used for filling non-corrosive liquefiable gas such as copropellant C butane gas, Freon, dimethyl ether(DME) and 134a. Main seals are suitable for filling all kinds of aerosol valves. With large two-way pumps, it is easy to operate to fill and measure accurately.All the pneumatic valves are open designs and easily replaceable.This machine has small-occupied area and convenient operation, one worker can complete the entire polyurethane foam production.Technical Parameters: Available valve: 1”Polyurethane Foam filling volume: 20-450(ml)Polymeric MDI filling volume: 20-450(ml)LPG filling volume: 20-450(ml)DME filling volume: 20-450(ml)Liquids filling accuracy: ≤±1%Applicable aerosol can height: 70-330(mm)Applicable aerosol can diameter: 35-65 (mm)Working Pressure: 0.5-1.0(MPa)Maximum air consumption: 2(m3/min)Production capacity: 500-600cans/hour